HPLC columns made in Japan
Inertsil ODS-EP (C18 with Embeddedr>
Inertsil ODS-EP contains a polar functional group embedded between the silica surface and the C18 group. The embedded polar group makes the C18 phase stable in 100% aqueous eluents without ”phase collapse”. This phase is also extremely "base deactivated” and provides superior peak shape for acids and bases in organic eluents as well as acidified eluents typically used in LC/MS. Inertsil ODS-EP is available in 5 micron particle size in column configurations ranging from capillary to 50mm ID preparative sizes.
The Inertsil 3-series represents a major advance in performance over the original Inertsil 2-Series. Inertsil 3-Series phases, including ODS-3, ODS-3V, ODS-P, ODS-EP, C8-3, Ph-3,CN-3, NH2, Diol, SIL-100Å, are based on a purer, higher surface area silica which is specially manufactured to provide maximum bonded phase coverage. The result is a series of columns which provide excellent peak shapes using simple eluents while operating at low pressure.
More technical information...
Check the catalog
- Polar functional grouped between silica and C18 chain
- Unique selectivity compared with standard C18 columns
- Compatible with 100% aqueous eluents
- Excellent peak shape for acid and basic compounds
- Ideal for LC/MS applications
Inertsil ODS-EP contains a polar functional group embedded between the silica surface and the C18 group. The embedded polar group makes the C18 phase stable in 100% aqueous eluents without ”phase collapse”. This phase is also extremely "base deactivated” and provides superior peak shape for acids and bases in organic eluents as well as acidified eluents typically used in LC/MS. Inertsil ODS-EP is available in 5 micron particle size in column configurations ranging from capillary to 50mm ID preparative sizes.
The Inertsil 3-series represents a major advance in performance over the original Inertsil 2-Series. Inertsil 3-Series phases, including ODS-3, ODS-3V, ODS-P, ODS-EP, C8-3, Ph-3,CN-3, NH2, Diol, SIL-100Å, are based on a purer, higher surface area silica which is specially manufactured to provide maximum bonded phase coverage. The result is a series of columns which provide excellent peak shapes using simple eluents while operating at low pressure.
More technical information...
Check the catalog
Functional Group
SDS
| Base Material | : 3 Series High Purity Silica |
| Particle Size | : 5 µm |
| Surface Area | : 450 m²/g |
| Pore Size | : 100 Å (10 nm) |
| Pore Volume | : 1.05 mL/g |
| Functional Group | : Octadecyl |
| End-capping | : None |
| Carbon Loading | : 9.0 % |
| USP Code | : L1 |
| pH Range | : 2 - 7.5 |
| I.D. | : 0.05 - 50 mm |
SDS
